Belt Weighing Indicator WI 2013L

Input: Load Cell, Proximity (PNP type)

Digital Inputs: Two (Potential free contacts)

Display: 20 Characters x 4 Line LCD with back light

Display Parameters:

- Flow Rate (Tons/Hr), Conveyor Speed (Mtr/Sec.), Net Weight (kg),

- Total Weight (Tons), Gross Weight (kg)

Non-resettable eight digit Totaliser (Reset possible only thro' Password)

Keypad: Six keys membrane keypad

Power Supply: 230V +/- 10% AC

Proximity power supply: +24V DC/50 mA

Output Options:

- 0 to 10 V DC (Proportional to Flow rate)

- Relay: One for alarm condition

- Serial interface: RS232 or RS485 (Optional)

Scaling method: Linear (Multiplying factors: Programmable)

Configuration Data are stored in serial NVRAM, Battery backup not required

Calibration through front keypad (Offset: Z & Span: S stored in NVRAM)

Different Password for Calibration & normal operation

Enclosure: Metallic, Powder coated, General Purpose, Panel Mounting type

Dimension:

- Outer: 192 mm (W) x 96 mm (H) x 110 mm (D)

- Cutout: 186 mm (W) x 92 mm (H)