Weight Indicator SMIT 4016

Display: 6 Digits, 7 segments RED LED, 0.56 inch height

Keyboard: 4 Keys (Index, Up arrow, side arrow, Esc) Membrane

Decimal Point: Selectable: 00000.0, 0000.00, 000.000 (XXXXX.X, XXXX.XX, XXX.XXX)

Programmable parameters: Capacity, Display Resolution, Grad, Zero Track Band, Zero Range

EEPROM/Flash Memory: Configuration Data are stored in serial EEPROM/Flash RAM and Battery backup not required

Analog to Digital Converter

Type: 24bit, (Delta-Sigma with integrated analogue and digital filter)

Conversion Rate: 15 measurement values per sec

Resolution: Internal up to 16 million counts; display up to 10,000 counts

SCALE CALIBRATION AND FUNCTIONS

Calibration: Calibration with weight

Digital filter: Step width : 0,1,2,5 Round OFF : 1,2,5 Moving Average : 0 to 30

Weighing functions: Tare, zero, auto zero tracking, auto-zero at power-up, auto-net at power-up

Linearity: Within 0.01 % F.S.

Load cells

Excitation: 5 V DC at 58...1 200 ohm, max. 100 mA

Number of load cells: Up to 8 load cells (350 ohm) or 18 load cells (1 100 Ohm) in parallel

Connection: 4-wire technology

Power Supply: 12...28 V DC, max. 300 mA / 110-230VAC (Factory configured)

ENVIRONMENT AND ENCLOSURE

Operation Temperature & humidity: -10 C to +50 C; 85% RH max, non-condensing

Housing & Protection: Panel mount, Aluminum Extruded, SS Front & Back

Dimensions & Weight: 48 x 96 x 110 mm (W x H x D), 0.5 kg

Cut-out: 92 mm (W) x 44 mm (H)

Serial Interface: One Port Factory configured for communication with remote display/Printer/Computer using RS-485/RS-232 (Factory configured)

Baud rate: 1200 to 115 200 baud

Digital Input: Two digital inputs, Isolated

Remote input for GROSS/NET, TARE and Zero functions programmable

Output: UP to 2 relays output (Batching or Alarm selectable)

Contact rating:

Transistor Outputs: 2 (Open Collector: 24 V DC, max. 100 mA), (Isolated)

ANALOG OUTPUT: 4-20 mA, 0-20 mA, 0-10 V or 0-5 V, 16 bit (Isolated)